Italian Renaissance Hair Jewellery

Yet another hair band, with pieces from two different filigree bracelets sewn onto a velvet ribbon band and backed with grosgrain ribbon to reduce slippage. I used three wig clips on the back for extra security.

Italian Renaissance Hair Jewellery

 Another hair band this week, constructed in the same way as the previous ones. This one has necklace components sewn on to the velvet ribbon. Probably too sparkly to really be appropriate for sixteenth century, but I couldn't resist it!

This one has 2mm seed beads sewn along the edges. I recently saw a beading technique demonstrated on Instagram that might be useful for this sort or project - I will let you know how I go.

Italian Renaissance Hair Jewellery

I recently finished another billament/hair accessory. This one has been sitting around in a half-finished state for literally years because I wasn't super happy with how it looked.

The flower shaped findings came to be with a 'patina' that I wasn't delighted about, and when I made the band up, it just seemed to look a bit shabby and be lacking something. So it sat in the UFO pile for a long time.

I resolved to finish it as part of my recent UFO completion drive, and I added matte gold seed beads (4mm) on the joins between the flat findings, to disguise the stitches and give add a bit of textural variety. I then started sewing the grosgrain ribbon on the back, and added white tiny seed beads as I went. When that was complete, I added three wig clips on the back to hold it in my hair.

It is still not my favourite accessory that I have ever made, but I am pleased that it is finished. Hopefully it will look nice when worn.

 

This image (a detail of Sister Minerva from 'Portrait of the family of the artist' by Sofonisba Anguissola) shows how the band will be worn; either in front of dressed hair such as hair taping, or in front of a caul. Image from: Sofonisba Anguissola Portrait of the family of the artist. Fragment. Sister minerva, 1568, 122×157 cm: Description of the artwork | Arthive

Here is the full painting:

(from Sofonisba Anguissola | Europeana)

Italian Renaissance Hair Jewellery

I'm having a break from boring sleeve sewing and finishing up some headwear that has been sitting around for a long time.

I really like the Italian style of wearing a necklace or decorated band in the hair in front of the braid like in this portrait by Sofonisba Anguissola

Image from: Sofonisba Anguissola - Portrait of the Artist's Sisters Playing Chess - WGA00697 - The Game of Chess (Sofonisba Anguissola) - Wikipedia

Since a lot of our SCA events are outside in public places, I don't feel confident pinning jewellery to my hair, and instead have been sewing jewellery components and beads to velvet bands that are secured into the hair with wig clips.

It is fiddly work, doesn't take up much room to store, and very easy to put off for another day!

I recently finished this one, which has bracelet pieces sewn onto a velvet band and separated with gold coils. The edges have tiny gold seed beads sewn on, and the back is faced with grosgrain ribbon (which helps grip the hair). I use a central wig clip and one at each end to secure.

I got a lot of elements suitable for this type of band from shops like Lovisa, Diva and Collete pre-Covid. I don't really go shopping like I used to, but thrift stores and op shops can be a good place to pick up old bracelets that you can break down to make this style of headwear.

Birds and Flowers Green Embroidered Caul

I recently finished this long term project. I have worked on this and a couple of other pieces every year at one of our Medieval Faire demos. I was trying to work out how long I have been working on them - probably one day a year for ten years! It is nice to have it finally finished. It is a record of how my skills have developed over that time.

 

The embroidery is worked in DMC embroidery floss on linen ground fabric, and the spangles are metal.

The fabric circle is gathered into a band which is decorated with green ribbon, I have added a metal comb inside the band to help keep the caul in place, and a couple of little buttonhole rings to slide bobby pins through.

This link to a previous post gives more information on the construction process: http://broidermebethan.blogspot.com/2014/05/purple-velvet-caul.html

Making the Purple patterned, Italian Style Caul

It has been a while since I posted a how-to on making a caul, so I thought I would share my technique. The photos and description refer specifically to the purple patterned caul that I finished recently, but my technique is pretty much the same for all my cauls, with minor changes to allow for different styles and head/hair sizes.

For this caul, I started out with a circle of pre-washed and ironed fabric. I prefer natural fabrics because they tend to breathe better than synthetics and are not as hot or as much of a fire risk. In period, this type of headwear would most likely have been silk, linen or possibly a fine wool or cloth of gold or silver. Budget is an issue for me, so sale cotton is my go-to. I prefer fabrics with a bit of body so that the hat won't look too limp. I love the way cotton velveteen sits when made up in this style. This particular fabric is a quilting cotton that I picked up on sale last year. The printed gold pattern adds a bit of stiffness.

Cutting out a plain fabric with the same pattern

The size of the circle that you use as your pattern really depends on three things:
How pouffy you want your caul to be
How big your head is
How much hair you have.

This image gives you an idea of the size circle I prefer for my large head

I tend to prefer a pouffy caul because I can just plait my hair and shove it in there without worrying about elaborate hair -dos. It also allows for when my hair is long or short, thick or thin. I have quite a bit of variation in my hair depending on which medications I am on etc. so a bit of extra space works for me. I usually use a large wire ring that I think is designed to be a wreath base.

You also have an option to make your base fabric an ova shape rather than a rectangle. Doing an oval shape tends to result in a bit more fabric around the ear area which reminds me quite a lot of the cauls that sixteenth century German ladies are shown wearing.

Once you have decided on shape, cut out your pattern piece. You will also need to cut out a piece of fabric to make the band, if you are making it out of the same fabric. I usually make my band the same length as the measurement around the head vertically, with 0.5cm allowed for ease plus seam allowance. I make the piece double the width that I want plus seam allowance and just fold it in half, but you could make the inside/lining part out of a different fabric if you wanted to. (For instance, making the lining piece out of velveteen might help it grip the hair better.)

At this point, you will need to add any decorations such as beads, ribbons, etc. I added a gold bead in the centre of each main motif,
If you are not adding extra decoration, give it the fabric a press. I usually run a zigzag stitch around the edge on the machine also, just to give it a bit more strength.

Next, run nice, even stitches all the way around your circle panel to allow you to gather it up into the headband. I actually do my gathering stitches in two separate lots to make it easier to get the gathers 'just right'. I usually mark the centre of the circle perimeter at top and bottom and run my threads between those points. On this particular caul I decided to try something different and to not gather the section on the top of my head in front of where my jewelled billiments sit, to reduce the pouf level at that point. Don't make your stitches too big or your gathers will be correspondingly large and the hat will not sit nicely. I prefer smaller gathers.

You will also need to sew the headband part. If you have cut a single piece, you'll need to sew the ends together so it is a joined piece like a ring of fabric. Then fold it in half and fold the seam allowances under, pressing or finger-pressing as you go. (Some people make the band a little shorter than they need and pop a piece of elastic in between the ends of the band. This is (obviously) not historically accurate. I don't find it necessary as I use clips to keep the caul on. I have also seen the ends of the band hemmed individually and ties or ribbons attached to tie it onto the head.)

Once your headband is sewn, gently pull up the gathering stitches until the circle (or oval) of fabric is the same size as the band. This is the part where you start adjusting the gathers so they look nice and even. Just gently move the gathers around until they look even and the bulk of fabric is evenly distributed.

I pin my gathers into place and handsew them on the inside and the outside. You could do this by machine if you prefer, I just don't like seeing visible stitching.

Once the band is on, you could call the hat finished. I thought it was lacking something at this stage though, and so experimented with different types of trim and ribbon. I chose this thin metallic ribbon and hand sewed it on to finish off the band.

 

The last thing that I do is add a metal hair comb at the centre front, sewn into the band. Some of my cauls have a wig clip sewn in at around the ear point. If you decide to do this, experiment to find out where it sits comfortably. On others I have made a little buttonole loop behind the ear to slip a bobby pin/kirby grip through to help it hold in place. You may not need this, but I have very slippery, fly -away hair, so this works for me. (I love a netted caul, but by the end of the day I have bits sticking out all over the place, despite how much product I use.) This is also why I make my bands quite wide. I have used bias binding for bands to more accurately match the portraiture, but the bigger bands work better with my difficult hair.

There is quite a lot of variation in the size of cauls depending upon the decade, as these portraits suggest:

 Titian's La Shiavona (Portrait of a Lady) 1510 held by National Portrait Gallery UK. Image from: https://en.wikipedia.org/wiki/La_Schiavona

Bellini's Portrait of a Naked Woman In Front Of Her Mirror c. 1515,  Image from: https://en.wikipedia.org/wiki/Naked_Young_Woman_in_Front_of_a_Mirror#/media/File:Giovanni_Bellini_-_Giovane_donna_nuda_allo_specchio.jpg

Portrait of a Woman by Vincenzo Catena c. 1520
Image from: https://www.italianways.com/the-venetian-portrait-painter-vincenzo-catena/















I've been tempted to make a caul that sits further back on my head like these, but I'm not sure how comfortable I would find it. I like having the bulk sit higher up on my head and not feel like it is pulling my head back.

Portrait of a Venetian Woman c. 1505 by Albrecht Durer
Image from: https://en.wikipedia.org/wiki/File:Albrecht_D%C3%BCrer_089b.jpg

Red Velveteen Caul with Gold Trim

I was so pleased with the grey velveteen caul that I decided to do another one.

This one is made of a remnant of red cotton velveteen. I cut the basic circle pattern out last year when I cut out all those sleeve pieces. I tend to zig zag the edges of my patttern pieces for stability and protection, especially since it so often takes me a long time to finish these projects.

You may remember that my pattern is traced around the top edge of a bucket to get a nice circle. Another option is to use an oval shape to get more of a German-style caul with a bit more body at the back of the head towards the nape of the neck.

This embroidered caul that I finished in 2017 has an oval shaped bag pattern and is wider at the back of the head

On my circle bag/piece I marked out a grid pattern but only sewed down my ribbon where it intersected. I hoped that this would create a nice visual effect as the ribbon puffed up a bit.

At the intersections of the ribbon I added a glass bead.

I didn't think there was a need to line this caul; I tend to get overheated rather than cold and the velveteen is quite bulky.

I put gathering stitches around the edge of the circle/bag piece. I used to do one unbroken line of gathering stitches, but I now do two lines that each go roughly half way around the circle/bag piece. This allows me to better control the gathers and even up any areas where the gathers look a little bulky.

For the last few cauls I have been leaving an ungathered section across the top of my head. I think it is more flattering and looks more like the portraits from the time.

Once the gathering stitches are in the circle/bag part, I prepare the band. It is a rectangular piece the length around my head plus seam allowance on both ends. I join the short ends so that I have a continuous band. (I also usually stab stitch the seam allowance down flat to reduce bulk, especially when using thick fabrics like velveteen.) I then fold the band in half and iron a crease into it. Then I fold the two outside edges into the centre crease and tack them into place. This gives a narrow band with the raw edges fully enclosed inside the band.

Slide the edge of the circle/bag piece inside the band so that the edge of the circle bag piece butts up against the crease. I usually start by matching the centre top of the circle/bag piece and the centre top of the band and pinning it into place. Do the same at the bottom centre - it will help you to keep the gathers even.

Then start drawing up your gathering threads. I adjust my gathers by eye, and pin them into place as I go. I double check again before stitching to make sure that they look even. 

The next step is to start hand stitching the band into place. Stitch around the band on the outside (the part you will see); I use a small whip stitch.

Now turn the hat inside out and pin the gathers down on the inside of the band and stitch around again, securing the inside of the gathers as you go. Use very small stitches as you don't want any to show on the outside of the hat if you stitch beyond the band.

Your hat is done! At this stage  I add a metal comb in the centre front and a wig clip in the area of the band that sits behind my ear. This is not authentic and simply helps to keep the caul on my head and stop wispy bits of hair escaping as the day wears on.

On the red velveteen caul, I decided to add some commercial trim around the band at the last minute because it looked a bit bare. It is hand-stitched down. You could also add beads or embroider a design onto the band before sewing it to the circle/bag pattern piece.

The inspiration portrait-

The Judgement of Paris (detail), Attributed to Antonio da Vendri

Image from https://www.rijksmuseum.nl/en/collection/SK-A-1296

This project has inspired more ideas, including a caul with different coloured panels like the one above, and one decorated with little tufts of thread (inspired by the inside of this caul)-

I'll keep you posted on the results!